Crocodile Mouth Current Clamp | 500 A is a perfectly designed accessory for
test equipment that can be used in high current connections up to 500 Amp.
Crocodile Mouth Current Clamp | 500 A
Crocodile Mouth Current Clamp | 500 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 500 Amp.
Related products
Copper Block for Confirmation of The Test Flame
Copper Block for Confirmation of The Test Flame meets IEC 60695-11-5 Clause A.2.3, Figure A.1. It is supplied with 0.5 mm outer diameter, mineral insulated thermocouple.
Wrapping Paper and Wooden Board
Wrapping Paper and Wooden Board meet the standards of IEC 60695-2-10 Clause 4.4 and IEC 60695-11-5 Clause 5.4. These are used on Glow Wire Test and Needle Flame Test.
Silver Foil
Silver Foil accessory meets the standard of EN/IEC 60695-2-10, Clause 5. This is used to verify the glow wire tip temperature.
Crocodile Mouth Current Clamp | 200 A
Crocodile Mouth Current Clamp | 200 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 200 Amp.
Test Packages for Refrigerators
Test Packages for Refrigerators accessory meets the standard of EN/IEC 62552 Clause 8.5. This is used as a load for measuring the temperatures in the respective compartments of the refrigerating appliances.
Copper Block for 500W Flame Verification
Copper Block for 500W Flame Verification meets the standard of IEC 60695-11-3 Clause 4.2.5, Figure 2. It is supplied with 0.5 mm outer diameter, mineral insulated thermocouple.
The Clip With Crocodile Tooth | 50A
The Clip With Crocodile Tooth | 50A is a perfectly designed accessory for test equipment that can be used in high current connections up to 50 Amp.
Certified Silver Foil
Certified Silver Foil Delivered certified by American ED&D. By making 1 mm cuts, approximately 90 -100 silver foil can be obtained from a strip.
