Crocodile Mouth Current Clamp | 40 A is a perfectly designed accessory for
test equipment that can be used in high current connections up to 40 Amp.
Related products
Copper Block for 500W Flame Verification
Copper Block for 500W Flame Verification meets the standard of IEC 60695-11-3 Clause 4.2.5, Figure 2. It is supplied with 0.5 mm outer diameter, mineral insulated thermocouple.
The Clip With Crocodile Tooth | 100 A
The Clip With Crocodile Tooth | 100 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 100 Amp.
Test Packages for Refrigerators
Test Packages for Refrigerators accessory meets the standard of EN/IEC 62552 Clause 8.5. This is used as a load for measuring the temperatures in the respective compartments of the refrigerating appliances.
The Clip With Crocodile Tooth | 200 A
The Clip With Crocodile Tooth | 200 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 200 Amp.
50W 500W and Flame Burner
50W 500W and Flame Burner meet the standards of EN/IEC 60695-11-3, Clause 4.2.1, Figure A.1 and EN/IEC 60695-11-4, Clause 4.2.1, Figure A.1 and Figure A.2.
The Clip With Crocodile Tooth | 30 A
The Clip With Crocodile Tooth | 30 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 30 Amp.
High Voltage Cable
High Voltage Cable These silicone rubber insulated cables are designed to be used in high voltage tests of 2 kV, 5 kV, 10 kV, 20kV, 30kV, 40kV, 50kV.
Shunt Resistance
Shunt Resistance is a type of resistor that allows a large portion of the current to be measured to pass over the measuring instrument when we want to measure a large current.
Reviews
There are no reviews yet.