Properties
Length: 100 mm
Width: 2 mm
Thickness: 0.06 mm
By making 1 mm cuts, approximately 90 -100 silver foil can be obtained from a strip.
Related products
Copper Block for Confirmation of The Test Flame
Copper Block for Confirmation of The Test Flame meets IEC 60695-11-5 Clause A.2.3, Figure A.1. It is supplied with 0.5 mm outer diameter, mineral insulated thermocouple.
Crocodile Mouth Current Clamp | 500 A
Crocodile Mouth Current Clamp | 500 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 500 Amp.
Copper Block for 500W Flame Verification
Copper Block for 500W Flame Verification meets the standard of IEC 60695-11-3 Clause 4.2.5, Figure 2. It is supplied with 0.5 mm outer diameter, mineral insulated thermocouple.
The Clip With Crocodile Tooth | 50A
The Clip With Crocodile Tooth | 50A is a perfectly designed accessory for test equipment that can be used in high current connections up to 50 Amp.
Crocodile Mouth Current Clamp | 200 A
Crocodile Mouth Current Clamp | 200 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 200 Amp.
Thermocouple to Measure Glow Wire Tip Temperature
Thermocouple to Measure Glow Wire Tip Temperature accessory meets the standard of EN/IEC 60695-2-10 Clause 4.3. It is designed to measure the tip temperature of the glow wire.
Test Device Accessories
Test Device Accessories High-voltage cable, high-voltage gun, high-voltage probe, current pliers, connector, clips, crocodile tongs, resistance box etc.
Wrapping Paper and Wooden Board
Wrapping Paper and Wooden Board meet the standards of IEC 60695-2-10 Clause 4.4 and IEC 60695-11-5 Clause 5.4. These are used on Glow Wire Test and Needle Flame Test.
Reviews
There are no reviews yet.