Showing 1–12 of 20 results

Show sidebar
50w 500w and flame burner
Close

50W 500W and Flame Burner

50W 500W and Flame Burner meet the standards of EN/IEC 60695-11-3, Clause 4.2.1, Figure A.1 and EN/IEC 60695-11-4, Clause 4.2.1, Figure A.1 and Figure A.2.
certified silver foil
Close

Certified Silver Foil

Certified Silver Foil Delivered certified by American ED&D. By making 1 mm cuts, approximately 90 -100 silver foil can be obtained from a strip.
copper block for confirmation of the test flame
Close

Copper Block for Confirmation of The Test Flame

Copper Block for Confirmation of The Test Flame meets IEC 60695-11-5 Clause A.2.3, Figure A.1. It is supplied with 0.5 mm outer diameter, mineral insulated thermocouple.
crocodile mouth current clamp 200 a
Close

Crocodile Mouth Current Clamp | 200 A

Crocodile Mouth Current Clamp | 200 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 200 Amp.
crocodile mouth current clamp 300 a
Close

Crocodile Mouth Current Clamp | 300 A

Crocodile Mouth Current Clamp | 300 A  is a perfectly designed accessory for test equipment that can be used in high current connections up to 300 Amp.
crocodile mouth current clamp 40 a
Close

Crocodile Mouth Current Clamp | 40 A

Crocodile Mouth Current Clamp | 40 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 40 Amp.
crocodile mouth current clamp 500 a
Close

Crocodile Mouth Current Clamp | 500 A

Crocodile Mouth Current Clamp | 500 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 500 Amp.
glow wire
Close

Glow Wire

Glow Wire accessory  meets the standard of  EN/IEC 60695-2-10 Clause 4.1, Figure 1. The apparatus required to fire the glow wire.
high voltage cable
Close

High Voltage Cable

High Voltage Cable These silicone rubber insulated cables are designed to be used in high voltage tests of 2 kV, 5 kV, 10 kV, 20kV, 30kV, 40kV, 50kV.
shunt resistance
Close

Shunt Resistance

Shunt Resistance is a type of resistor that allows a large portion of the current to be measured to pass over the measuring instrument when we want to measure a large current.
silver foil
Close

Silver Foil

Silver Foil accessory meets the standard of EN/IEC 60695-2-10, Clause 5. This is used to verify the glow wire tip temperature.
test device accessories
Close

Test Device Accessories

Test Device Accessories High-voltage cable, high-voltage gun, high-voltage probe, current pliers, connector, clips, crocodile tongs, resistance box etc.