DC Winding Resistance Tester | MTS-TWR-CP10
DC Winding Resistance Tester | MT-TWR-CP10; It is used for winding resistance measurement. Transformers, common inductors, reactors, electromagnetic operating mechanisms, etc. It is a necessary test for semi-finished products, finished factory tests, installation, handover tests and preventive tests of the power industry in the manufacture of inductive coils.
DEVICE INTRODUCTION VIDEO
DC Winding Resistance Tester | MTS-TWR-CP10; It is used for winding resistance measurement. Is a must-test item for semi-finished products, finished products factory test, installation, handover test and preventive test of power sector in the manufacture of inductive coils such as transformers, mutual inductors, reactors, electromagnetic operating mechanisms, etc. It can effectively discover the selection and welding of inductive coils, Loose connection parts, missing strands, broken wires and other manufacturing defects and hidden dangers after operation. It is also an essential test item for transformers after handover, overhaul and change of tap changer. At the same time, similar to dry-type transformers and amorphous alloy transformers, since the low-voltage coils are wound with copper foil, the resistance value is extremely low, which brings high precision and resolution requirements to the test. Under normal circumstances, testing the DC resistance of transformer windings and high-power inductive devices by traditional methods (bridge method and voltage drop method) is a time-consuming and labor-intensive task. In order to meet the needs of fast testing of inductive coil DC resistance, improve the test accuracy of DC resistance, shorten the test time and reduce the testing burden of testers, this DC resistance tester has been developed. The maximum output current range of DC Winding Resistance Tester | MTS-TWR-CP10; is designed to be 10A, which solves the problem of low-value resistance testing. At the same time, for high-resistance samples such as transformers, the meter also extends the DC resistance test range to 1MΩ, which is an ideal device for testing the DC resistance of transformer windings and high-power inductive equipment.
The DC Winding Resistance Tester | MTS-TWR-CP10; also adopts 5.6-inch color LCD display, simple and beautiful operation interface, built-in rechargeable lithium battery and charging circuit, with high-speed microcontroller as the core, combined with high-speed A/D converter and program-controlled current source technology, with resistance temperature conversion function , In circuit design, it has a variety of protection functions such as back EMF protection, disconnection protection, power failure protection, and overheating alarm. In order to achieve high-precision, high-stability, high-speed testing, it also has the characteristics of self-test, automatic discharge, large output current, wide range, strong anti-interference ability, fast charging and discharging speed, data analysis and processing, and discharge indication.
TECHNICAL PARAMETERS
| Function | Transformer winding resistance test, low resistance test, equipotential bonding resistance test, metal connection resistance test, micro-ohmmeter | |
| Power Supply | Built-in: 14.8V 7800mAh rechargeable lithium battery; External: AC 220V/2A 50Hz/60Hz |
|
| Test Method | four-wire method | |
| Charger | 16.8V/2A charger | |
| Display Mode | 5.6-inch LCD color screen, 640dots×480dots, display area 116mm×88mm | |
| Test Interface | I+ (current positive), I- (current negative), U+ (voltage positive), U- (voltage negative) |
|
| Output Current | 10A, 5A, 1A, 400mA, 200mA, 40mA, <5mA | |
| Range (Mains 220V) |
500μΩ （10A 1mΩ~4.4Ω （Constant current 5A） 10mΩ~22Ω （Constant current 1A） 25mΩ~55Ω （Constant current 400mA） 200mΩ~110Ω （Constant current 200mA） 1Ω~550Ω （Constant current 40mA） 10Ω~1MΩ （Constant voltage <5mA） |
|
| Range (Built-in battery) |
500μΩ~200mΩ （Constant current 10A） 1mΩ~800mΩ （Constant current 5A） 10mΩ~12Ω （Constant current 1A） 25mΩ~30Ω （Constant current 400mA） 200mΩ~60Ω （Constant current 200mA） 1Ω~300Ω （Constant current 40mA） 1Ω~1MΩ （Constant voltage 12V <5mA） |
|
| Max. Resolution | 0.1μΩ | |
| Overrange Prompt | –OL– | |
| Discharge Tips | After the test, the buzzer sounds to indicate that the discharge is in progress, and the buzzer stops after the discharge is completed. | |
| Printer | The instrument panel is embedded with a printer, press the print button to print the test results | |
| Data Storage | After the test is completed, the data is automatically saved, and the cycle is saved, which can store 9999 sets of data | |
| Meter Size | About 320mm(L)×275mm(W)×145mm(H) | |
| Package Size | About 400mm(L)×245mm(W)×335mm(H) | |
| Weight | Instrument: about 9.2kg (including packaging) | |
| Toolbox | Tool box can bear 200kg | |
| Test Line | Both ends of the test lead are tapped, and the wiring is simple | |
| Current | Constant current℃～40℃; Below 80%RH, no condensation |
|
| Storage Temperature And Humidity | -10℃; below 70%RH | |
| Suitable For Safety Regulations | IEC61010-1, CAT |
Related products
Glow Wire Test Apparatus | MTC-GWE100
DEVICE INTRODUCTION VIDEO
DEVICE SHORT VIDEO
Programmable Voltage Tester | MTJ-7110
Spark Tester | MT-S15K
