Copper Block for Flame Verification | 50W

Copper Block for Flame Verification | 50W; is supplied with a 0.5 mm diameter, mineral insulated thermocouple connected to the copper block produced in accordance with TS EN 60695-11-4 Figure 1.

Copper Block for Flame Verification | 50W; TS EN 60695-11-4 Figure 1 is supplied with a 0.5 mm diameter, mineral insulated thermocouple connected to the copper block.

Copper Block:
– Diameter: 5.50 mm±0.01 mm,
– Mass: 1.76 g ± 0.01 g
– Material: High conductivity electrolytic copper (Cu-ETP UNS C 11000)

Thermocouple:
– Outer Diameter: 0.5 mm,
– Material: Ni Cr or Ni Al
– Insulation: Mineral insulated, metal sheathed.
– Class: 1 (IEC 60584-2)
– Continuous operating temperature: 1050°C