Previous product
cable fault detector
Cable Fault Detector
Back to products
Next product
bunched cable vertical flame spread tester
Bunched Cable Vertical Flame Spread Tester
ventilated aging furnace
Click to enlarge

Ventilated Aging Furnace

Ventilated Aging Furnace test oven MT is used to test the change properties before and after thermal heat for electric wires, leather, plastic, rubber, cloth, designed in line with test requirement of MT7212, MT B7757.

Get Quote
SKU: MT-41016CE Category:
Description

Ventilated Aging Furnace test oven MT is used to test the change properties before and after thermal heat for electric wires, leather, plastic, rubber, cloth, designed in line with test requirement of MT7212, MT B7757.

After being heated uniformly under the specified temperature and time and the oven keeps fresh air inside, to observe the sample before and after ageing of resistance to yellow, chipping, shrinkage, stretching, residual rate and other performance to determine its ageing characteristics

Technical parameters:

  • Oven internal dimensions: 500×400×500mm
  • Temperature range: room temperature ~ 250 ℃
  • Control accuracy:±0.5 ℃
  • Analytical accuracy: 0.1 ℃
  • Distribution error:±2 ℃
  • Heating time: it takes about 40 minutes from room temperature to 250 ℃
  • Materials of oven interior: SUS#304 stainless steel, oven exterior materials: anti-static spray treated, with beautiful appearance and other characteristics
  • Thermal insulation materials: 80mm thick high-density fiberglass

Ventilated Aging Furnace Specifications:

  • Overall dimensions: 1030×620×1400
  • Power supply: AC 380V
  • Motor power: 6 kW
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Ventilated Aging Furnace”

Your email address will not be published. Required fields are marked *

Related products

cable semi conducting rubbers and plastics resistivity
Close

Cable Semi Conducting Rubbers and Plastics Resistivity Tester

Cable Semi Conducting Rubbers and Plastics Resistivity Tester a microcomputer controlled test instrument applied to test the volume resistivity of rubbers and plastics. It is based on the microcomputer principles, automatically test the semi-conducting rubbers and plastics volume resistivity, after testing the resistance, and then input the sample thickness values, the instrument automatically displays the volume resistivity measurement values. No need to manual calculations, with features of high accuracy, good stability, compact structure, and easy to operate. It is the best test instrument for it so far.
Read more
Quick view
thermal stability tester
Close

Thermal Stability Tester

Thermal Stability Tester designed in accordance with IEC 60811-3-2 Clause 9.1 for the thermal stability test of PVC insulations and sheaths used in electrical and optical cables.
Read more
Quick view
road vehicle cable low temperature
Close

Road Vehicle Cable Low Temperature Winding Test Device

Road vehicle cable low temperature winding test device is used to examine the property of round cables and round insulated wire core under the low temperature conditions
Read more
Quick view
insulation splitting machine for xlpe
Close

Insulation Splitting Machine for XLPE Cables

Insulation Splitting Machine for XLPE Cables designed to cut test specimens from the cable insulation to the required dimensions for use in mechanical and physical property tests of XLPE cables with rated voltage of 35 kV and lower.
Read more
Quick view
cold bend test apparatus
cold bend test apparatus
Close

Cold Bend Test Apparatus

Cold Bend Test Apparatus conforms to the standard requirements of IEC540. It is used for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which cannot be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be between 4 and 5 times the diameter of the test piece (see below).The mandrel shall be uniformly rotated at a rate of one revolution in about 5 s and the number of turns shall be as specified in the following table.
Read more
Quick view
bridge fixtures
Close

Bridge Fixtures

Bridge fixture in line with the amended GB/T 3048 standard requirements of conductor resistance test: The distance from each end of the potential fixture head and the current fixture head is not less than 1-5 times of sample cross-section perimeter, according to usage, it is sorted as bare conductors series and stranded conductors series.
Read more
Quick view
with load swing tester
Close

With Load Swing Tester

With Load Swing Tester used for non-rewirable plug wires, household appliances wires and similar electrical appliances wires bending and load tests. Test method is to fix the specimen in the grip, and add a certain load, the grip swing around during the test, after a certain number of times, view the disconnection rate; or when it is not energized, check its total number of swing.
Read more
Quick view
high frequency spark tester
high frequency spark tester
Close

High Frequency Spark Tester

High Frequency Spark Tester designed to test the adequacy of cable insulation according to IEC 62230 standard. The cable is placed on the production line and it ensures fast deterioration of the cable insulation, holes, errors that may occur during production and with high precision.
Read more
Quick view