MT-2516 DC Precision Cable Resistance Meter is designed to measure the resistance of cables or other conductors with high precision by applying DC current, in accordance with TS EN 60245-1 standard.
MT-2516 series DC resistance meter various resistance, switch contact resistance, connector contact resistance, relay coils and contact resistance, transformers, inductors, motors, deflection winding resistance, welding contact conductor resistance, metal riveting resistance of vehicles, boats, airplanes, Printed circuit lines and crack detection etc. used in places.
It is designed to measure the resistance of cables or other conductors with high precision by applying DC current in accordance with EN 60245-1 standard.
Features:
Cable, conductor material, shunt resistors etc. very low resistance, it can make conductivity measurements with high accuracy and stability. Test errors are minimized by detecting temperature changes during resistance measurement. An optional infrared thermometer can be used for this.
MT-2516 Precision Cable Resistance Meter Technical Parameters:
| Measurement Parameters | DC Resistor |
| Accuracy | 0.05% + 2 |
| Measurement Range | 0.01μΩ ～2MΩ |
| Current Range | 1 μA ～1A |
| Measurement Mode | Manual and Automatic |
| Measurement Velocity | 50 Hz. Frequency:
FAST: 22 ms, MED: 42 ms, SLOW: 102 ms 60 Hz. Frequency: FAST: 18.5 ms, MED: 35 ms, SLOW: 102 ms (The values above are the values measured when the screen is off. 10 ms should be added when the screen is on.) |
| Indicator | Direct, ∆% |
| Maximum Indicator | 10,400 |
| Adjustment | There is a short-circuit reset for each step. |
| Karşılaştırıcı | HI/LO/IN |
| Trigger | Internal, External (Front trigger, rear panel manually and foot switch trigger, click, bus trigger) |
| Interface | USB, USB HOST, RS232C, HANDLER |
| Test Leads | With 4 terminal protector (2 terminals for current, 2 terminals for voltage) |
| Temperature Comparison | — |
| Screen | 24 true color, 4.3″, 480×270 LCD TFT |
| GENERAL FEATURES | |
| Power Suplly | Voltage: 110 V/ 200 V, Frequency: 50-60 Hz. |
| Dimension and Weight | 265 mm (M),*100 mm (S), 340 mm (H), 3.5 kg. |
| Accessories | Kelvin test tongs, Power supply cable |
