Previous product
laser diameter gauge single axis
Laser Diameter Gauge | Single Axis Measurement
Back to products
Next product
infrared heating aging oven
Infrared Heating Aging Oven
laser diameter gauge dual axis
laser diameter gauge dual axis
laser diameter gauge dual axis
Click to enlarge

Laser Diameter Gauge | Dual Axis Measurement

Laser Diameter Gauge | Dual Axis Measurement cable, wire, hose, pipe, strip, glass etc. from the extrusion machine in the production line. It is designed for double measurement of diameter measurement of transparent or non-transparent materials. It can control the working speed of the extrusion machines so that the products coming out of the production line are of the desired diameter.

Teklif Al
SKU: MTLDM-2XXXE Category:
Description

Features:

  1. Visible red semiconductor laser
  2. PLC, RS485 interface, (Optional RS232 / USB / RROFIBUS)
  3. Measurement: Two axes (X, Y axes);
  4. Operating Mode: Continuous
  5. RROFIBUS -DP can be placed and connected to MODBUS converter and PLC, IPC.
  6. Extruder speed can be changed automatically by adding Remote Display & Controller.
  7. Laser output Power: <2mW.
  8. Supply: 220V±15%, 50-60 Hz,
  9. Power: <30W
Model Measuring range Accuracy Resolution Diman sions
MT LDM- 25XY 0.1～20 mm ± 0.001 0.001 mm 48.5 x 20 x 8.5 cm
MT LDM- 50XY 0.2～45 mm ± 0.002 0.001 mm 48.5 x 20 x 8.5 cm
MT LDM- 60XY 0.2～55 mm ± 0.002 0.001 mm 62 x 25 x 6 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Laser Diameter Gauge | Dual Axis Measurement”

Your email address will not be published. Required fields are marked *

Related products

bare wire mandrel winding
Close

Bare Wire Mandrel Winding and Torsion Tester

Bare wire mandrel winding and torsion tester is used for copper rods, aluminium rods, steel wires mandrel winding and torsion tests under the specified torsion speed; as well as test of broken resistance strength and torsion frequency performance for different metal wires, and toughness and adhesion performance for overhead wire and galvanized steel wire. Test method is to clamp the both ends of the specimen, one end is fixed and the other end 360º continuously twisted.
Read more
Quick view
wire and cable sheath scratch
Close

Wire and Cable Sheath Scratch Resistance Tester

Wire and Cable Sheath Scratch Resistance Tester used in the scratch test of wire and cable sheaths.
Read more
Quick view
infrared heating aging oven
Close

Infrared Heating Aging Oven

Infrared heating aging oven is applicable for wires, leathers, plastics, rubbers, textiles changing properties before and after being heated. For the wires, it is used to maintain the fresh air inside the chamber and a special regulation of ventilation when being heated.
Read more
Quick view
cold bend test apparatus
cold bend test apparatus
Close

Cold Bend Test Apparatus

Cold Bend Test Apparatus conforms to the standard requirements of IEC540. It is used for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which cannot be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be between 4 and 5 times the diameter of the test piece (see below).The mandrel shall be uniformly rotated at a rate of one revolution in about 5 s and the number of turns shall be as specified in the following table.
Read more
Quick view
computer controlled electronic tensile
Close

Computer Controlled Electronic Tensile Tester

Computer-controlled electronic tensile tester (large deformation) is widely used for hardware, metal, rubber and plastics, footwear, leather, clothing, textiles, insulators, wires, cables, terminals and other types of materials, to test tensile, tear, peel, compression, bending and other materials research and development, inspection and test, with multiple functions, wide range of uses. The computer-controlled electronic tensile tester (large deformation) is adopted aluminium alloy enclosure, with lightweight body, beautiful appearance.
Read more
Quick view
high frequency spark tester
high frequency spark tester
Close

High Frequency Spark Tester

High Frequency Spark Tester designed to test the adequacy of cable insulation according to IEC 62230 standard. The cable is placed on the production line and it ensures fast deterioration of the cable insulation, holes, errors that may occur during production and with high precision.
Read more
Quick view
environmental stress cracking resistance
Close

Environmental Stress Cracking Resistance Test Apparatus

Environmental Stress Cracking Resistance Test Apparatus used for determination of the environmental stress-cracking resistance of ethylene plastics, which is designed and manufactured in line with ASTM D1693 standard <Test Method for Environmental Stress-Cracking of Ethylene Plastics> and related Japanese standards.
Read more
Quick view
pressure test device at high
Close

Pressure Test Device at High Temperature

Pressure Test Device at High Temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
Read more
Quick view