With this device, high frequency (around 3 kHz) sine voltage waves up to 15kV can be produced and bead electrodes (copper brush, carbon brush) can be applied to the cable insulation along the 5 cm channel. Compared to Mains Frequency Spark Tester, it takes up less space in the production line and it can be applied to up to 1000 meters per minute cable.
- Puncture / Skip counter
- High Voltage warning
- Audible and visual alarm in case of puncture / jump
- In case of puncture / jump, current is limited and the device is protected.
- Small volume and even small footprint.
- The instrument automatically terminates the test when the cover is opened.
|Test Voltage||1 – 15 kV|
|Cable diameter||0-6 mm|
|Output frequency||2 – 3.5 kHz|
|Current With Load||Resistive:4mA; Capacitive: 40mA|
|Cable rate||1000 m / min|
|Electrode length||50 mm|
|Electrode type||Bead Chain|
|Length of signal cable||5 metre|
|Power supply||220V, 50/60 Hz|