Previous product
infrared heating aging oven
Infrared Heating Aging Oven
Back to products
Next product
bridge fixtures
Bridge Fixtures
cable semi conducting rubbers and plastics resistivity
Click to enlarge

Cable Semi Conducting Rubbers and Plastics Resistivity Tester

Cable Semi Conducting Rubbers and Plastics Resistivity Tester a microcomputer controlled test instrument applied to test the volume resistivity of rubbers and plastics. It is based on the microcomputer principles, automatically test the semi-conducting rubbers and plastics volume resistivity, after testing the resistance, and then input the sample thickness values, the instrument automatically displays the volume resistivity measurement values. No need to manual calculations, with features of high accuracy, good stability, compact structure, and easy to operate. It is the best test instrument for it so far.

Teklif Al
SKU: MTDB-4E Category:
Description

Technical parameters:

  • Measuring range:10-4～103Ω.cm
  • Measurement error is less than ± (0.5 % rd ± 2d)
  • Current electrode: width 50mm, contact width of the sample 5mm, distance between two current electrodes 110mm
  • Potential electrode: width 50mm, contact Radius <R 0.5mm, distance between two potential electrodes 20mm ± 2%
  • Automatic test, measurement range of 200kΩ gear, 20kΩ gear, 2kΩ gear, select the measurement gear, enter the sample thickness after measuring the resistance, the instrument automatically displays the volume resistivity measuring value. The instrument can retain the displayed test values

Specifications:

  • Overall dimensions: 420×300×200mm
  • Power supply: AC 220V 50/60Hz 0.5A
  • Oven: (optional for users)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Cable Semi Conducting Rubbers and Plastics Resistivity Tester”

Your email address will not be published. Required fields are marked *

Related products

insulation splitting machine for xlpe
Close

Insulation Splitting Machine for XLPE Cables

Insulation Splitting Machine for XLPE Cables designed to cut test specimens from the cable insulation to the required dimensions for use in mechanical and physical property tests of XLPE cables with rated voltage of 35 kV and lower.
Read more
Quick view
laser diameter gauge single axis
laser diameter gauge single axis
Close

Laser Diameter Gauge | Single Axis Measurement

Laser Diameter Gauge | Single Axis Measurement, cable, wire, hose, pipe, strip, glass etc. from the extrusion machine in the production line. It is designed for double measurement of diameter measurement of transparent or non-transparent materials. It can control the working speed of the extrusion machines so that the products coming out of the production line are of the desired diameter.
Read more
Quick view
cold bend test apparatus
cold bend test apparatus
Close

Cold Bend Test Apparatus

Cold Bend Test Apparatus conforms to the standard requirements of IEC540. It is used for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which cannot be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be between 4 and 5 times the diameter of the test piece (see below).The mandrel shall be uniformly rotated at a rate of one revolution in about 5 s and the number of turns shall be as specified in the following table.
Read more
Quick view
road vehicle cable low temperature
Close

Road Vehicle Cable Low Temperature Winding Test Device

Road vehicle cable low temperature winding test device is used to examine the property of round cables and round insulated wire core under the low temperature conditions
Read more
Quick view
with load swing tester
Close

With Load Swing Tester

With Load Swing Tester used for non-rewirable plug wires, household appliances wires and similar electrical appliances wires bending and load tests. Test method is to fix the specimen in the grip, and add a certain load, the grip swing around during the test, after a certain number of times, view the disconnection rate; or when it is not energized, check its total number of swing.
Read more
Quick view
bare wire mandrel winding
Close

Bare Wire Mandrel Winding and Torsion Tester

Bare wire mandrel winding and torsion tester is used for copper rods, aluminium rods, steel wires mandrel winding and torsion tests under the specified torsion speed; as well as test of broken resistance strength and torsion frequency performance for different metal wires, and toughness and adhesion performance for overhead wire and galvanized steel wire. Test method is to clamp the both ends of the specimen, one end is fixed and the other end 360º continuously twisted.
Read more
Quick view
intelligent digital resistance bridge
Close

Intelligent Digital Resistance Bridge

Intelligent digital resistance bridge is an upgraded version of traditional intelligent conductor resistance testing machine, which is a comprehensive test system, comprising functions of a DC bridge, a amplifying galvanometer, constant current source and standard resistors and other accessories.
Read more
Quick view
laser diameter gauge dual axis
laser diameter gauge dual axis
Close

Laser Diameter Gauge | Dual Axis Measurement

Laser Diameter Gauge | Dual Axis Measurement cable, wire, hose, pipe, strip, glass etc. from the extrusion machine in the production line. It is designed for double measurement of diameter measurement of transparent or non-transparent materials. It can control the working speed of the extrusion machines so that the products coming out of the production line are of the desired diameter.
Read more
Quick view