Bunched Cable Vertical Flame Spread Tester

Bunched Cable Vertical Flame Spread Tester is used to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of bundle cable or fiber optic cable.

Features:

Bunched cable vertical flame spread tester is used to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of bundle cable or fiber optic cable. In accordance with IEC60332—3—10: 2009

Technical Parameters

Internal dimensions of stainless steel test chamber: 1,000(W)×2,000(D) ×4,000(H)mm, supplemented with insulated mineral wool material
At the lower section of the test chamber, there is a 800(W) x 400(D) sized hole at the 150mm position from the front side of the chamber to supply the air
Exhaust hole of the top: 300(W) ×1, 000(D)mm
Wide stainless steel ladder dimensions: 500(W) ×3, 500(H) mm; quantity: 1
Standard stainless steel ladder dimensions: 800(W) ×3, 500(H); : 1
Two sets of banding standard propane burner devices
Two sets of venturi gas mixing devices
Pressure gauge and pressure reducing valve device, which is able to adjust propane and air pressure to 0.1 MPa
Control and regulation of gas supply: airflow is rotor flowmeter 10 ~ 100L / Min adjustable, propane flow is rotor flowmeter 2 ~ 20L / Min adjustable
Cabinet with ladders and handrails is more convenient for users to observe at the top
With a ball valve enable to manually shut down the gas supply
Set flame test time automatically, and by then the air supply can be cut off automatically
Mounted K thermocouples inside the chamber, indicating the internal temperature
With forced fire extinguishing device
Automatic lifting device
External dimensions of the burning cabinet: 1150(W) ×2150(D) ×5110(H)mm
External dimensions of the control cabinet: 1280(W) ×830(D) ×1290(H)mm
Power supply: AC 220V, 50/60Hz, 2A
Air source: propane and air( prepared by users)