The Resistance Bridge is required to combine and measure the cable samples for cable scales according to the TS EN 60245-1 standard.
To apply the cable sample whose resistance is to be measured, the sample is applied to the currents at both ends. Then, the cable sample is stretched from the samples with the rotating arm in the device, and readings are taken from the tension ends with precise measurements.
Can be used for round conductor, stranded conductor resistance tests.
Bridge Fixtures Technical parameters:
MT 62112-AE | MT 62112-BE |
Up to 630 mm2 | Up to 1200 mm2 |
For solid or stranded cables | For solid or stranded cables |