Previous product
road vehicle cable low temperature
Road Vehicle Cable Low Temperature Winding Test Device
Back to products
Next product
computer controlled electronic tensile
Computer Controlled Electronic Tensile Tester
bare wire mandrel winding
Click to enlarge

Bare Wire Mandrel Winding and Torsion Tester

Bare wire mandrel winding and torsion tester is used for copper rods, aluminium rods, steel wires mandrel winding and torsion tests under the specified torsion speed; as well as test of broken resistance strength and torsion frequency performance for different metal wires, and toughness and adhesion performance for overhead wire and galvanized steel wire. Test method is to clamp the both ends of the specimen, one end is fixed and the other end 360º continuously twisted.

Teklif Al
Get Quote
SKU: MT-22166E Category:
Description

Standards:

  • GB4909.4-2009
  • GB4909.7-2009

Technical parameters:

  • Torsion specimen diameter range: copper rod less than Ф 8mm, steel wire less than Ф3mm
  • Torsion speed range: (10, 30, 60)r/min, adjustable
  • Grip space: 0~500mm
  • Grip movement: chuck type
  • Winding specimen diameter range: aluminium wire: Ф3mm-6mm, use the core rod for test, those of diameter are less than Ф3mm,

we suggest to wind them manual; steel wire: less than Ф4mm

  • Core rod range: Ф3mm, Ф4mm, Ф5mm, Ф6mm, Ф8mm, Ф10mm, Ф12mm, Ф14mm, Ф16mm, Ф18mm, Ф20mm
  • Weight: 500g×1, 1000g×1, 2000g×4
  • Hook: 587.5g

Specifications:

  • Overall dimensions: 1400mm×500mm×1500mm
  • Power supply: AC 220V 50/60Hz 4A
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bare Wire Mandrel Winding and Torsion Tester”

Your email address will not be published. Required fields are marked *

Related products

pressure test device at high
Close

Pressure Test Device at High Temperature

Pressure Test Device at High Temperature is used in the indentation of the wire and cable insulation being produced at high temperature and pressure. To test the high temperature resistance and high pressure resistance deformation ability under thermal and mechanical loads simultaneously.
Read more
Quick view
computer controlled electronic tensile
Close

Computer Controlled Electronic Tensile Tester

Computer-controlled electronic tensile tester (large deformation) is widely used for hardware, metal, rubber and plastics, footwear, leather, clothing, textiles, insulators, wires, cables, terminals and other types of materials, to test tensile, tear, peel, compression, bending and other materials research and development, inspection and test, with multiple functions, wide range of uses. The computer-controlled electronic tensile tester (large deformation) is adopted aluminium alloy enclosure, with lightweight body, beautiful appearance.
Read more
Quick view
hot set test device
Close

Hot Set Test Device | Three Groups Type

Hot set test device is used in conjunction with the high-temperature oven, specimens are hung in the device and placed in an oven, and put the weights on the lower grip of specimens, after 10 minutes, measure the distance between the marks and calculate the elongation
Read more
Quick view
thermostatic water bath
Close

Thermostatic Water Bath

Thermostatic Water Bath is designed to test the withstand voltage and insulation resistance of the cable or wire by placing it in the water at the specified temperature. It can be used in conjunction with the insulation resistance tester and withstand voltage tester, accordance with VDE, UL standards. Materials: The surface is electrostatic painting, the inside is stainless steel.
Read more
Quick view
wire bending tester
Close

Wire Bending Tester

Wire Bending Tester applicable to bending test of power lines and DC lines for manufacturers and quality inspection departments, as well as power cable, USB cable, headphone cable, audio cable, plug wire, headphone cable and other finished wire bending test and swing or tests
Read more
Quick view
bridge fixtures
Close

Bridge Fixtures

Bridge fixture in line with the amended GB/T 3048 standard requirements of conductor resistance test: The distance from each end of the potential fixture head and the current fixture head is not less than 1-5 times of sample cross-section perimeter, according to usage, it is sorted as bare conductors series and stranded conductors series.
Read more
Quick view
cable semi conducting rubbers and plastics resistivity
Close

Cable Semi Conducting Rubbers and Plastics Resistivity Tester

Cable Semi Conducting Rubbers and Plastics Resistivity Tester a microcomputer controlled test instrument applied to test the volume resistivity of rubbers and plastics. It is based on the microcomputer principles, automatically test the semi-conducting rubbers and plastics volume resistivity, after testing the resistance, and then input the sample thickness values, the instrument automatically displays the volume resistivity measurement values. No need to manual calculations, with features of high accuracy, good stability, compact structure, and easy to operate. It is the best test instrument for it so far.
Read more
Quick view
with load swing tester
Close

With Load Swing Tester

With Load Swing Tester used for non-rewirable plug wires, household appliances wires and similar electrical appliances wires bending and load tests. Test method is to fix the specimen in the grip, and add a certain load, the grip swing around during the test, after a certain number of times, view the disconnection rate; or when it is not energized, check its total number of swing.
Read more
Quick view