The MTJ-5530 is a comprehensive rechargeable battery tester dedicated to the production and testing needs of rechargeable batteries. This tester can make quantitative and accurate measurement of some basic parameters of the battery and measure the open circuit voltage of the battery. For lithium battery functions such as resistance, charge, discharge performance, battery capacity, especially overcharge protection, overdischarge protection, overcurrent protection, short circuit protection and other functions, and related values have been measured, which greatly facilitates battery production. It can set the upper and lower limits of the measurement parameters, defective batteries are quickly detected in the dead battery to improve production efficiency. In addition, some special functions are added to ensure that the device has some features of the general tool and equipment, which increases its flexibility and has the characteristics of a wide variety of applications.
TECHNICAL PARAMETERS
| Model | MTJ-5530 | MTJ-5530+ | MTJ-5530B | |||
| Test Range | Voltage Measurement Range | 0-36V, Resolution:1mV Accuracy:±30mV |
0-60V Resolution:1mV Accuracy:±30mV |
0-62V Resolution 1mV Accuracy：±5mV |
||
| Internal Resistance Measurement Range | 0-1999mΩ Resolution 1mΩ | |||||
| Capacity Measurement Range | 0-99999mAH,Minimum resolution 1mAH | |||||
| R1 R2 Resistance | 1kΩ ~ 200kΩ | |||||
| Accuracy | Voltage Measurement Accuracy | ±（result*0.1%+3mV） （voltage 0~36V） ±（result*0.1%+30mV）（voltage 37~60V） |
||||
| Current Measurement Accuracy | ±（result*0.2%+30mA）（current 0~10A） ±（result*0.5%+30mA）（current 11~30A） |
|||||
| Internal Resistance Measurement Accuracy | ±（result*1%+1mΩ） | |||||
| Capacity Measurement Accuracy | ±2% | |||||
| Test Speed | Static Test (All Functions) | 1.1-2s | ||||
| Capacity test | Determine the capacity test time according to the battery capacity and discharge power | |||||
| Internal CNC | Maximum output voltage(Constant voltage + constant current) | 20V | 60V | |||
| Voltage Source Index | Output Maximum Current | 5A | 10A(common） | |||
| Output Maximum Power | 80W | 200 W | ||||
| Ripple Voltage | <20mV | <100mV | ||||
| Load Adjustment Rate | <10% | |||||
| Response Time (time from 0 to the highest output voltage) | 1S | |||||
| Internal CNC electronic load index | Maximum Discharge Voltage | 30V | 62 V | |||
| Maximum Discharge Current | 10A（continuous） | 30A（continuous） | ||||
| Limit Power | 80W（continuous） | 100W（continuous | 200W（continuous） | |||
| Load Mode |
Constant Current |
Constant voltage, constant current | ||||
| Interface | No | Yes (with host computer software) | ||||
| Accessories | Test fixture for resistance, Test fixture for voltage, Temperature probe, Power cable, | |||||
| Size&Weight | JK5530/JK5530+ Dimension(mm):225(W)*110(H)*355(D), About 3.6kg JK5530B Dimension(mm):225(W)*110(H)*405(D), About 4.5kg |
|||||
