Partial Discharge PD Detector | MTS-PD
Back to products
MULTITECH TEKNOLOJİ, MULTITECH TECHNOLOGY
Peak Voltage Voltmeter | MTS-PV10
Click to enlarge

AC/DC Peak Voltmeter | MT-PV1000

AC/DC Peak Voltmeter | MT-PV1000; peak voltage is one of the important measured parameters and it is difficult to accurately measure the peak value of voltage with a general voltmeter, especially when the voltage waveform changes, a peak voltmeter should be used. The smart AC/DC digital voltmeter is designed to measure DC high voltage test and power frequency high voltage test.

Order Now
SKU: MT-PV1000E Categories: , Tags: ,
Description

AC/DC Peak Voltmeter | MT-PV1000; peak voltage is one of the important measured parameters and it is difficult to accurately measure the peak value of voltage with a general voltmeter, especially when the voltage waveform changes, a peak voltmeter should be used. The smart AC/DC digital voltmeter is designed to measure DC high voltage test and power frequency high voltage test.

It can measure the peak value of AC voltage, average value, peak value, frequency, waveform and average value of DC voltage.

 

TECHNICAL PARAMETERS

Measurement Range0-9999.9kV (external connected voltage divider or PT)
Measurement Frequency0~300HZ
Measurement Error<1.0%
Partial Pressure Ratio Setting0.1-99999.9
Maximum Input Voltage for Unconnected Voltage Divider200V (RMS)
DisplayLCD
Input Impedance≥ 10M
Ambient Temperature-10℃~40℃
Relative Humidity of Environment<80%
Power Supply220V +10% 50HZ
Power Consumption ≤10W

 

GENERAL INFORMATION
What is Peak Voltage?

Peak voltage is the peak or highest value of voltage for any voltage waveform.

Importance of Peak Voltage

The effects of peak voltage can damage the AC Motor and cause premature wear in the motor insulation.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “AC/DC Peak Voltmeter | MT-PV1000”

Your email address will not be published. Required fields are marked *

Related products

Bridge Fixtures | MT-DQ-1

 Bridge Fixtures | MT-DQ-1; resistance bridge is required for connecting the cable sample and making the resistance measurement for cable resistance measurements according to TS EN 60245-1 standard.
Quick view

Dry Air Sterilization (Etüv) | MTED-Series

 Dry Air Sterilization (Etüv) | MTED-Series; dry air sterilizers are designed for use in research and industrial laboratories, sterilization, drying, heating, heat treatment and long-term stability testing applications. They provide very good temperature control for homogeneous heat distribution and stable temperatures. Thanks to the fan circulation system controlled by a reliable and sensitive PID microprocessor control system, precise and constant temperatures are achieved. It has an easy to use LCD screen control panel.
Quick view

Grounding Resistance Tester | MT78XR

Grounding Resistance Tester | MT78XR; is used to measure the ınternal grounding resistance of electrical equipment, which ıt reflect the (contact) resistance between the total ground terminals of the electrical equipment. It ıs suitable for measuring the resistance value between the outer casing and the ground wire of various kinds of motors, electric appliances, ınstruments and meters, domestic appliance and so on. This series of tester according to the following standards:standard for household electrical appliances (IEC6035, GB4706.1-2001,  GB4706.1-1998), standard for lamp(IEC60598-1-1999,  GB7000.1-2000), standard for ınformation (GB8898-2001, GB12113. GB4943-2001,  IEC60065,IEC60950) and so on.
Quick view
MTS-TLNoL-100 Trafo boşta yükte kayıp ölçme test cihazı

Load No-Load Tester | MTS-TLNoL-100

Load No-Load Tester | MTS-TLNoL-100 measures transformer load current, load loss, short circuit voltage, short circuit (load) losses. Harmonic test can be analyzed up to 31 harmonics. All relevant test results are automatically corrected. The instrument can automatically: waveform correction, temperature correction, non-rated voltage correction, calibration and other non-rated current correction for more accurate test results. You can store 500 sets of experimental results.
Quick view
oil breakdown tester

Oil Breakdown Tester

Oil Breakdown Tester is designed to test the high voltage strength of transformer oils, which are easily oxidized and lose their insulation properties due to humidity and extreme temperatures.
Quick view
MULTITECH TECHNOLOGY, MULTİTECH TEKNOLOJİ
MULTITECH TECHNOLOGY, MULTİTECH TEKNOLOJİ

Precision Cable Resistance Tester| MTJ-2516C

 Precision Cable Resistance Tester| MTJ-2516C; series are high precision DC resistance tester. They can meet the quality assurance of production line, purchase inspection and laboratory measurement, and also can be applied to the test of automatic equipment.
Quick view

Spark Tester | MT-S15K

 MT-S15K, spark tester is a special test equipment for insulation defects of wire and cable.Spark Tester is designed to test the adequacy of cable insulation / insulation in accordance with TS EN 62230 standard. By placing the cable on the production line, it ensures that the deterioration, holes and errors that may occur in the cable insulation during production are detected quickly and with high precision.
Quick view

Transformer DC Resistance Tester 40 Amper | MTS-TWR-40

The DC Resistance transformer to meet fast measurement requirement, we developed MTS-TWR-40 DC Resistance Tester. The instrument is a new powerful technology, small size, light weight, high output current and other characteristics.
Quick view